Features
• ±3% output voltage regulation
• Noise attenuation - 120 dB common mode - 60 dB transverse mode
• Surge suppression tested to ANSI/IEEE C62.41 Class A & B Waveform: - <10 V let through typical
• Acts as a step-up or step-down transformer
• Harmonic filtering
• Hardwired
• Galvanic isolation provides exceptional circuit protection.
• 25 year typical MTBF
• No maintenance required

Features
• Superior voltage regulation of ±1%
• Surge suppression tested to ANSI/IEEE C62.41, Class A&B Waveform
• Harmonic filtering
• Hardwired
• Acts as a Step-up/Step-down Transformer
• Galvanic isolation provides exceptional circuit protection.
• 25 year typical Mean Time Before Failure
• No maintenance required

Applies to all models except 23-28-275-6.

Features
• ±3% output voltage regulation
• Noise attenuation - 120 dB common mode - 60 dB transverse mode
• Surge suppression tested to ANSI/IEEE C62.41 Class A & B Waveform: - <10 V let through typical
• Acts as a step-up or step-down transformer
• Harmonic filtering
• Hardwired
• Galvanic isolation provides exceptional circuit protection.
• 25 year typical MTBF
• No maintenance required

Features
• ±3% output voltage regulation
• Noise attenuation - 120 dB common mode - 60 dB transverse mode
• Surge suppression tested to ANSI/IEEE C62.41 Class A & B Waveform: - <10 V let through typical
• Acts as a step-up or step-down transformer
• Harmonic filtering
• Hardwired
• Galvanic isolation provides exceptional circuit protection.
• 25 year typical MTBF
• No maintenance required

Features
• ±3% output voltage regulation
• Noise attenuation - 120 dB common mode - 60 dB transverse mode
• Surge suppression tested to ANSI/IEEE C62.41 Class A & B Waveform (<10 V let-through typical)
• Harmonic filtering
• Galvanic isolation provides exceptional circuit protection.
• Point-of-use Protection (cord & plug connected) -Easy & Flexible Installation
• 25 year typical MTBF
• No maintenance required.

Depending on model, see selection tables to confirm agency approvals for specific model numbers.

Features
• Rugged, industrial design
• High overload capability
• High MTBF - No fans used
• No power factor restriction on loads
• Tight regulation of ±3% typical for protection against sag (-25%) and swell (+15%) conditions
• Failsafe, no-break, auto-bypass
• Status indicating lights
• Shielded, copper wound isolation transformer
• Surge suppression to ANSI/IEEE and IEC Standards
• High efficiency (96%) microprocessor controlled tap switcher
• Automatic under voltage protection
• UL1012, UL1449-2, CULUS Listed
• Two-year limited warranty

Related Products